Maintenance

Warning
	Safety hazard Do not use a pressure washer, water jet, or similar to clean the electric tug.

The electric tug should be cleaned regularly (depending on usage and the environment), to prevent the formation of deposits or residues which could lead to reduced performance or even damage to the electric tug.

For cleaning the electrical system and the motor, we recommend the use of filtered and dehumidified compressed air (less than 6 bars at a min. distance of 20 cm).

Keep the battery clean and dry. Dirt and water can cause a loss of current which reduces the capacity of the battery. After cleaning, lubricate the battery pins with a small amount of acid-free petroleum jelly.

Wipe dry dirt on metal parts and frame parts with a dry soft cloth. Wipe mud and other wet dirt with a damp cloth. Then dry the parts using a dry soft cloth.

Never use abrasive or aggressive cleaning agents. These may scratch or stain the electric tug. Do not use organic solvents such as paint thinner, benzene or white spirit. Be careful with water in connection with the electronic components.