VDI TT1000-M-Inox (M020)
| Characteristics | 1.1 | Manufacturer | Movexx International B.V. | ||
| 1.2 | Manufacturer’s type designation | TT1000-M-Inox | |||
| 1.3 | Drive |
Electric with LiFePo4 battery |
|||
| 1.4 | Operator type | Pedestrian | |||
| 1.5* | Rated capacity/rated load | Q [t] | 1 | ||
| 1.7** | Rated drawbar pull | F [N] | 546 | ||
| 1.8 | Load distance, center of drive axle to lift face | x [mm] | 710-460 | ||
| 1.9 | Wheelbase | y [mm] | 950-700 | ||
| Weights | 2.1 | Weight incl. battery | kg | 108 | |
| 2.2*** | Axle load with load | front/rear | kg | 150/58 | |
| 2.3*** | Axle load without load | front/rear | kg | 95/13 | |
| Wheels/Tyres | 3.1 | Tyres, R=(rubber), PU=(polyurethane) | front/rear | PU/R | |
| 3.2 | Tyres size | front | mm | 200 | |
| 3.3 | Tyres size | rear | mm | 125 | |
| 3.5 | Wheels, number front/rear (x = driven) | 1x/2 | |||
| 3.6 | Tread width | front/rear | b10/b11 [mm] | 60/50 | |
| Dimensions | 4.9 | Tiller height | min./max. | h14 [mm] | 1080/650 |
| 4.19 | Total length | l1 [mm] | 923-1173 | ||
| 4.21 | Total width | b1 [mm] | 460-656 | ||
| 4.32 | Ground clearance, center of wheel base | m2 [mm] | 32,5 | ||
| 4.35 | Turning radius | Wa [mm] | 1165-915 | ||
| Performance | 5.1 | Travel speeds | with/without load | km/h | 3/4 |
| 5.1.1 | Travel speed backwards | with/without load | km/h | 3/4 | |
| 5.5** | Max drawbar pull (S2 = 60 Min) | with/without load | N | 273 | |
| 5.6** | Max drawbar pull (S2 = 5 Min) | with/without load | N | 546 | |
| 5.8* | Maximum slope (5 min) | with/without load | % | 0/10 | |
| 5.9 | Acceleration | with/without load | s | 10/8 | |
| 5.10 | Service brake | Electromagnetic | |||
| Drive | 6.1 | Drive motor output (S2 = 60 Min) | kW | 0,3 | |
| 6.4 | Battery voltage/rated capacity | V/Ah | 24/20 | ||
| 6.5 | Battery weight +/- 5% | kg | 8,5 | ||
| Other | 8.1 | Drive control | DC | ||
| 10.7 | Sound level at operator’s ear | dB(A) | < 65 |
*The maximum payload is affected by the type of slope, operating time and floor type. See the graphic below for an indication of the allowable slope to load ratio (depending on slope surface/wheel type/machine weight).
**The maximum drawbar load on the hook [N] is determined by the engine power of the machine but is affected by the type of wheels of the machine and of the towed trolley/load, the type of surface and the driveable weight of the machine.
